Rss

Archives for : February2016

Introduction to Drywall Repair Materials

There’s a catch to drywall repair that everyone should know before attempting to “do-it-yourself” for the first time. Drywall repair is easy to do, but it is also easy to do a tremendously bad job. For this reason, a simple introduction to drywall repair materials and tools is a great place to start on your path toward patching and painting your property’s interior structural damages. But remember, it’s not just practice that makes perfect, it is also knowledge, especially in terms of drywall repair. So continue your research and learn all that you can about drywall work before getting started on your personal projects. Continue reading to review some common industry knowledge for drywall repair.

Drywall Compound

Also called drywall “mud”, there are two common types of joint compound used to repair and patch: light-weight and all-purpose. Both are easy to work with and retain a room-temperature shelf-life of 9 months. The most important tip for buying drywall compound is to buy enough. For large projects, expect to purchase 4.5 gallon bucket of material.

For smaller projects, you can get away with a one gallon bucket, but you may be paying close to the same amount for a larger bucket. If you think you might have future work in the next 9 months, it is more cost-effective to go with the larger bucket. If not, go with the smaller amount so to not waste any material.

Spackle and Plaster

Many people are confused about the difference among drywall compound, spackle, and plaster. The differences are subtle, and hardly noticeable to the average layperson, but they do exist. Compound, joint compound, or drywall mud all refer to the same product, and used mostly for larger drywall and gypsum board projects that require more durability, namely to cover joints between panels.

Spackle is very similar to joint compound, but used mostly for small household repairs for plaster and drywall. Plaster is a type of wall material found mostly in older or historic buildings. It is a more time-consuming approach to wall repair in comparison to spackle.

Drywall Repair Tools

You can purchase drywall repair kits that come with virtually all the essentials for drywall patching and repair. Kits range in quantity, size, and price, but common ones generally include 2-3 flexible knives, a utility knife, an insider-corner knife, hammer, screwdriver, saw, drill, nails, and screws. But drywall repairs also require additional materials depending on the needs of the project, including:

  • Compound
  • Self-Adhering Mesh Tape
  • Paper Tape
  • Drywall
  • 1×4 Block of Pine Wood
  • Hand Sander
  • Nail Bar
  • Level
  • Hack Saw
  • Sandpaper
  • Miter Box
  • Primer
  • Paint
  • Paint Brush or Roller

You can purchase all of the above-listed materials at any local hardware or home improvement store. Ask a store attendant to point you in the right direction, and give advice on the most reliable products. Talk to a licensed drywall contractor for expert advice on household drywall repairs, drywall projects, drywall replacement, and more. They can even take the weight off your shoulders by getting the job done faster, better, and at a price that won’t make you think twice!

Article Source: http://EzineArticles.com/9506578

Sub Floor Ventilation – Effective Options Available

It is always important to ensure that your surroundings are safe and are not a risk to your health. Buildings should always adhere to health and safety standards so that the occupants are free from the risk of disease. An important aspect of buildings that contribute to the health of the occupants is the sub floor ventilation. Proper ventilation will enable you to breathe in fresh air and will also keep termites away which can cause damage to the floor of the building.

Why Sub Floor Ventilation

A sub floor refers to an extra level of flooring that is positioned right on top of the floor joists, and another level of flooring is then placed over it which is the visible floor. A sub floor is usually added to a building so that the floor remains even and flat and also to increase its stability. When air between the floors absorbs moisture from the soil, the humidity of the air goes up which causes the flooring and the framing of the building to also absorb moisture.

Ventilation is therefore important in order to decrease the humidity of the air that is found between the floors. This can be done by replacing the dump air found between the floors with dry air from outside.

Need For Ventilation

Once you realize that your floor has mould and that there is a stale smell in the rooms of your home, then you may be in need of immediate sub floor ventilation. Dampness of the soil usually increases during wet weather, and the moisture easily gets absorbed into the floor and walls of your home. This dampness causes moulds that attract termites which end up destroying your floor.

Moulds can also discolor the tiles of your floor and the bricks that make up your home. Sub floor ventilation is therefore important to in reducing the maintenance costs of your home and also in retaining its value.

Types Of Ventilation

There are different methods that can be used for sub floor ventilation, and how much ventilation will be required will depend on the amount of humidity in that location. The use of air vents is widely used in ventilating the sub floor. This is where air vents are located on opposite sides of the sub floor and air can therefore get in through one side and out through the other.

There should be nothing blocking the movement of the air in and out of the sub floor. To make this system more effective, sub floor fans can be installed to ensure there is proper movement of air. The fans create negative pressure thus causing air to rush in from the vents.

You can decide to have fans which run throughout or ones which are timed. There are also fans which ran on solar energy which means that they do not run when it is cold. Fans should not run when it is wet since the air that comes in will be damp.

Another method of ventilation is compelled ducted ventilation, which causes air to flow freely in areas which are damp and those that are not easily reachable. Damp air is replaced by fresh, dry air from outside. This method uses fans and ducting connected to a power source.

Article Source: http://EzineArticles.com/9523278

Tips on Choosing a Home for Yourself!

So, are you out on the look for a new house? Well, buying a house involves a lot of investment and thus, this is why making this decision is quite a tricky one. Thus, to make things simpler, here are a few pointers that will help you make a more focused decision.

Affordability – First and foremost, you must consider and decide your budget and set a slab. Then, you must think about the various loans or mortgage rates that are prevailing in the market. After considering these two, you must check the interest rates and decide on the interest rate of the loan that is most affordable for you. Thus, whichever you can afford, you must go for that particular scheme of bank loan and then further with the purchasing process of the house.

Availability – Once you have figured out what you can afford, the next thing you should consider is seeing if the kind of property you have your eye on is available in the area that you want it in. It is not necessary that the plot of land or house that you desire will be available as and when you want it. Thus, the best thing for you to do in such a situation would be to contact a few real estate agents and tell them about your requirement. This way, as soon as anything that you require crops up, these agents will give you the information first. So, in this way, you will be able to buy the house that you want in a much less time and in an easier manner.

Suitability – Once you have found a place that you like and it falls well within your price, then the next thing that you must consider before making a purchase is that how convenient and suitable it will be for you. For example, you will have to think about a number of factors such as the facilities that are being provided to you, whether it is a convenient place for you to live in if the crime rate in the area is low, whether the neighbourhood is a noisy one or not. Thus, you must take a few of these points into consideration before you make that call.

Apart from these things, you must also consider a few other things like the location, the availability of the transport, the overall neighbourhood in general, the cafes, bistros and other such places in the locality.

Once you have checked everything mentioned above and everything ticks the boxes, you must go ahead and make a purchase!

Article Source: http://EzineArticles.com/9530382

11 Simple House Hacks You Could Do For Your Home

Here are a few ways to do cheap fixes for your home in the most affordable way.

1. Insulation
Fixing your insulation could save you at least 50% of your energy bills. All you need to do is use rubber tubing, fiberglass and cellulose on the spaces between doors, windows and other openings. Using double-glazed windows is also useful for repelling outside temperature. You could lower the value on your thermostat now.

2. Energy Saving Appliances
These expensive appliances could save you more in terms of energy expenses. A great bonus with energy saving appliances is added features. For air conditioners, for example, you could set the time it would activate and it would turn itself off. For washing machines, it would optimize the energy it uses for cleaning clothes as well as the water needed for washing.

3. Fixing Holes in the Basement
Your home’s foundation could give in due to moist and the natural wear-and-tear of materials. If the foundation-form rod holes are becoming exposed, you might need some cement to patch the holes. Bricklayer mortar or cement and sand should do the trick for such holes. However, you will need to find some personal cement laying equipment.

4. Tile Laying
Laying tiles isn’t easy. Builders make sure the floor is even, the tiles are cut and evenly spaced, and they are laid down carefully or else they could be broken. Tile mastic serve as the strongest adhesive for tile laying projects. They are affordable in most hardware stores too.

5. The Magic That is WD-40
Squeaky windows and doors? A solution spray called WD-40 could work wonders by lubricating the hinges of these annoying home pests. Any household should have a can of this at the ready for any lubricating needs.

6. Talcum Powder
Too-shiny floors are great to look at but annoying to hear. Squeaky floors, a negative side-effect of ultra-house cleaning, are no match to talcum powder. It makes the floor cleaner and less slippery too.

7. Wallpaper Unfurling
Awesome wallpapers having their adhesive grip loose? Don’t fret. Using a knife, spread wallpaper paste on a clean sheet of paper. Attach the paper against the loose area of the wallpaper. Press the wallpaper and writing paper sandwich against the wall and voila! You have a fixed wallpaper!

8. Cleaning an Old Chandelier
Majestic chandeliers could return to their glorious years with good dusting. Unplug your chandelier, wear white cotton gloves damp with glass cleaner. Wipe the chandelier clean and then use another pair of dry gloves to rub the chandelier clean of dust.

9. Sliding Window Problems
WD40 won’t do well for sliding window problems, but a bit of silicone spray lubricant would do great for the skids. Spray the lubricant on a rag then wipe it along the sliding tracks of the windows. Silicone lubricants work well with wood, metal or plastic, so you won’t have to worry about anything.

10. Stubborn Bathroom Decals
Sometimes, debris leave a mark on your house. The WD40 lubricant could help here. By spraying the areas with WD40, you could then use a credit card to scrape the debris away from your bathroom tiles and even your bathtub. Rinse the entire thing with dishwashing soap and you’re done.

11. Clever Light Bulb Removal Trick
Using duct tape, you could instantly remove any hard-to-reach and hard-to-unscrew light bulb. Procure a one foot length of electric tape into the middle of the light bulb. Then, by folding the tape in half, stick it onto itself. Then grip each end between your thumb and index finger then you could instantly loosen up the light bulb.

Article Source: http://EzineArticles.com/9527478